Importance of Modeling and Simulation of Materials in Research

  • Mahmoud Ahmad Physics Department, College of Science in Zulfi, Majmaah University, 1712 Zulfi, Saudi Arabia

Abstract

All researchers have experience with various complicated phenomena and processes in materials and have contact with understanding of different complex dynamical systems. Consequently, one has to predict and optimize the system under study and compare the output results to its experimental setup. The experimental setup is done to confirm and spread out information about the system; however still, many researchers are not familiar with the results arising from the experimental setup or fabrications processes. To obtain valid experimental results, it is necessary to pay carful attentions to the tools, devices and the applied techniques for measuring and observations detectors. This experimentations and fabrications process cover all area from forming and characterizations of nanostructures to macrostructures. In system characterizations, it is common to apply system modeling to predict and represent the system by a mathematical model that is accomplishable due to the relations between the inputs and outputs defined by formulas.

Downloads

Download data is not yet available.

Author Biography

Mahmoud Ahmad, Physics Department, College of Science in Zulfi, Majmaah University, 1712 Zulfi, Saudi Arabia

Physics Department, Faculty of Science, Al-Azhar University, 71524 Assuit, Egypt.

References

[1]           N. Bisai and P. Kaw, "Influence of hot and cold neutrals on scrape-off layer tokamak plasma turbulence," Physics of Plasmas, vol. 25, p. 012503, 2018. View


[2]           S. Meher, M. Carroll, T. Pollock, and L. Carroll, "Designing nickel base alloys for microstructural stability through low γ-γ′ interfacial energy and lattice misfit," Materials & Design, vol. 140, pp. 249-256, 2018. View


[3]           L. O. Olasunkanmi, B. P. Moloto, I. B. Obot, and E. E. Ebenso, "Anticorrosion studies of some hydantoin derivatives for mild steel in 0.5 M HCl solution: Experimental, quantum chemical, Monte Carlo simulations and QSAR studies," Journal of Molecular Liquids, vol. 252, pp. 62-74, 2018. View


[4]           A. Barzegar, C. Pattison, W. Wang, and H. G. Katzgraber, "Optimization of population annealing Monte Carlo for large-scale spin-glass simulations," arXiv preprint arXiv:1710.09025, 2017. View


[5]           A. Möller and V. S. Gullapalli, "System cost and efficiency optimization by heat exchanger performance simulations," Energy Procedia, vol. 129, pp. 459-465, 2017. View


[6]           K. Matouš, M. G. Geers, V. G. Kouznetsova, and A. Gillman, "A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials," Journal of Computational Physics, vol. 330, pp. 192-220, 2017. View


[7]           S. Vijay, A. Tugirumubano, S. H. Go, L. K. Kwac, and H. G. Kim, "Numerical simulation and experimental validation of electromagnetic properties for Al-MWCNT-Fe2O3 hybrid nano-composites," Journal of Alloys and Compounds, vol. 731, pp. 465-470, 2018. View


[8]           P. Joshi, J. Singh, R. Sharma, V. Jain, and J. Akhtar, "A facile approach to fabricate ZnO thin film based micro-cantilevers," Microelectronic Engineering, vol. 187, pp. 50-57, 2018. View


[9]           M. g. Kim, H. Alrowais, and O. Brand, "3D‐Integrated and Multifunctional All‐Soft Physical Microsystems Based on Liquid Metal for Electronic Skin Applications," Advanced Electronic Materials, 2018. View


[10]         J. Lawrence, A. Ostendorf, A. Neumeister, S. Dudziak, S. Passinger, and J. Stampfl, "Micro-and Nano-Parts Generated by Laser-Based Solid Freeform Fabrication," in Advances in Laser Materials Processing (Second Edition), ed: Elsevier, 2018, pp. 595-633.


[11]         H. F. Tibbals, Medical nanotechnology and nanomedicine: CRC Press, 2017.


[12]         A. Bahishti, “Peer Review : Critical Process of a Scholarly Publication”, Journal of Modern Materials, vol. 2, no. 1, pp. 1.1-1.2, Oct. 2016. View

Published
2018-01-10
How to Cite
[1]
M. Ahmad, “Importance of Modeling and Simulation of Materials in Research”, J. Mod. Sim. Mater., vol. 1, no. 1, pp. 1-2, Jan. 2018.